November 2006 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Nov 1 00:52:46 JST 2006
Ending: Thu Nov 30 19:54:33 JST 2006
Messages: 314

• [ATM] Aluminum disks tooling plate Sands Machine link   Mike Lockwood
  • [ATM] Subject line policy   Vladimir Galogaza
    • [ATM] Aluminum disk uses, subject lines   Mike Lockwood
• [ATM] Secondary heater.   Neil Booker
• [ATM] Aluminum Tooling plate   Don Clement
  • [ATM] Aluminum Tooling plate   William Marriott
• [ATM] SM4   Richard
  • [ATM] SM4   Jack Swaton at Starry Host
    • [ATM] SM4   Marinus van der Lugt
      • [ATM] SM4   hermit
      • [ATM] SM4   Dave Tabor
      • [ATM] SM4   Mitch
• [ATM] Current "favorite" for hogging?   Lawrence Sayre
• [ATM] SM4   Polk, Tom
  • [ATM] SM4   Jeff Rowe
• [ATM] test   Jan van Gastel
• [ATM] New to list, I want to make my own mirror   JM O'Neill
  • [ATM] New to list, I want to make my own mirror   Marinus van der Lugt
    • [ATM] New to list, I want to make my own mirror   David Nicholls
      • [ATM] New to list, I want to make my own mirror   Brian William Bainbridge
      • [ATM] New to list, I want to make my own mirror   Don R Surles
      • [ATM] New to list, I want to make my own mirror   Mark Holm
      • [ATM] New to list, I want to make my own mirror   Mark Holm
  • [ATM] New to list, I want to make my own mirror   William Marriott
    • [ATM] New to list, I want to make my own mirror   William Marriott
  • [ATM] New to list, I want to make my own mirror   Michael Lindner
    • [ATM] New to list, I want to make my own mirror   Mark Holm
  • [ATM] New to list, I want to make my own mirror   Mel Bartels
• [ATM] looking for illustrations of different telescope.   Harro Treur
  • [ATM] looking for illustrations of different telescope.   Pete
  • [ATM] looking for illustrations of different telescope.   Dave Smith
  • [ATM] looking for illustrations of different telescope.   Dave Smith
    • [ATM] looking for illustrations of different telescope.   hermit
• [ATM] Fw: looking for illustrations of different telescope.   Dave Tabor
• [ATM] SM4   Roman Toledo
  • [ATM] SM4   Richard
  • [ATM] SM4   John Lynch
    • [ATM] SM4   hermit
• [ATM] Thin slumped mirror blanks.   Thomas Janstrom
• [ATM] New to list, I want to make my own mirror   Max Mirot
  • [ATM] New to list, I want to make my own mirror   lance clarke
    • [ATM] New to list, I want to make my own mirror   Richard
      • [ATM] New to list, I want to make my own mirror   Thomas Janstrom
• [ATM] Russell Porter and Griffith coelostat   Don Clement
• [ATM] SM4   John Lynch
• [ATM] Documentary film on ATM   Mahmood Hassan
  • [ATM] Documentary film on ATM   Richard
  • [ATM] Documentary film on ATM   Thomas Janstrom
  • [ATM] Documentary film on ATM   Mitch
  • [ATM] Documentary film on ATM   Dominic-Luc Webb
    • [ATM] Documentary film on ATM   Vladimir Galogaza
      • [ATM] Documentary film on ATM   Dominic-Luc Webb
      • [ATM] Documentary film on ATM   Thomas Janstrom
• [ATM] ATM Movie   Francis J. O'Reilly
  • [ATM] ATM Movie   Don R Surles
    • [ATM] ATM Movie   matt at considine.net
      • [ATM] ATM Movie   Dave Smith
      • [ATM] ATM Movie   hermit
      • [ATM] Mercury Transit   Dave Tabor
      • [ATM] Mercury Transit   Tom Conlin
      • [ATM] Mercury Transit   Daniel Fundo
      • [ATM] ATM Movie   Dominic-Luc Webb
      • [ATM] ATM Movie   Daniel Fundo
  • [ATM] ATM Movie   Heiner Otterstedt
• [ATM] Help in moving my secondary   RP Sutton
  • [ATM] Help in moving my secondary   Mike Lockwood
    • [ATM] Help in moving my secondary   RP Sutton
  • [ATM] Help in moving my secondary   Ken Hunter
  • [ATM] Help in moving my secondary   Don Clement
• [ATM] ATM Movie   Dave Smith
  • [ATM] ATM Movie   Vladimir Galogaza
    • [ATM] ATM Movie   Dominic-Luc Webb
• [ATM] DC Motor for grinding machine question   Rod Brackenridge
  • [ATM] DC Motor for grinding machine question   Michael Lindner
  • [ATM] DC Motor for grinding machine question   Richard
    • [ATM] DC Motor for grinding machine question   Rod Brackenridge
      • [ATM] DC Motor for grinding machine question   Richard
      • [ATM] DC Motor for grinding machine question   Rod Brackenridge
      • [ATM] DC Motor for grinding machine question   Richard
      • [ATM] DC Motor for grinding machine question   Michael Lindner
      • [ATM] DC Motor for grinding machine question   Michael Lindner
      • [ATM] DC Motor for grinding machine question   Ken Hunter
      • [ATM] DC Motor for grinding machine question   Dave Tabor
      • [ATM] DC Motor for grinding machine question   Don Clement
      • [ATM] DC Motor for grinding machine question   Michael Lindner
  • [ATM] DC Motor for grinding machine question   Robert Mohr
• [ATM] Documentary film on ATM   Tom Krajci
  • [ATM] Documentary film on ATM   Mel Bartels
• [ATM] ATM movies!!   jamoore47
• [ATM] powerpoint file link fixed!   Dave Smith
• [ATM] SolidWorks 3D Instant Website - Tri-dobFull Assembly   Dave Smith
  • [ATM] SolidWorks 3D Instant Website - Tri-dobFull Assembly   jamoore47
• [ATM] Obelate, dang,,,   j h
  • [ATM] Obelate, dang,,,   Mitch
  • [ATM] Fixing oblate sphere (fix oblate spheroid)   Mike Lockwood
• [ATM] The warp factor on the digital setting circle.   john smith
• [ATM] ATM-movies #2.   jamoore47
• [ATM] DC Motor for grinding machine question   GARY FUCHS
  • [ATM] DC Motor for grinding machine question   Don Clement
    • [ATM] DC Motor for grinding machine question   Daniel Fundo
      • [ATM] The ding, the inteferogram, and the analysis   Dale Eason
      • [ATM] DC Motor for grinding machine question   Don Clement
      • [ATM] DC Motor for grinding machine question   Mike Lockwood
      • [ATM] DC Motor for grinding machine question   Don Clement
      • [ATM] DC Motor for grinding machine question   Mike Lockwood
      • [ATM] DC Motor for grinding machine question   Don Clement
      • [ATM] DC Motor for grinding machine question   George Anderson
• [ATM] ATM Large Binocular Telescope   The Alarm Co.
• [ATM] DC Motor for grinding machine question   polaraligned
• [ATM] After a layoff of 3 yrs or so.............   John and Bernadine Murray
  • [ATM] After a layoff of 3 yrs or so.............   James Crombie
  • [ATM] After a layoff of 3 yrs or so.............   Mike Lockwood
    • [ATM] After a layoff of 3 yrs or so.............   Michael Lindner
• [ATM] Edge polish - when to call it good   Mark
  • [ATM] Edge polish - when to call it good   jamoore47
    • [ATM] Edge polish - when to call it good   Mitch
• [ATM] Polihing turntable bearings   Don Clement
  • [ATM] Polihing turntable bearings   Richard
    • [ATM] Polihing turntable bearings   Don Clement
• [ATM] Preparing to trepan for the first time   Chris Dalla Piazza
  • [ATM] Preparing to trepan for the first time   Daniel Fundo
    • [ATM] Preparing to trepan for the first time   Chris Dalla Piazza
• [ATM] Preparing to trepan for the first time   lenses at adelphia.net
• [ATM] Preparing to trepan for the first time   lenses at adelphia.net
• [ATM] Preparing to trepan for the first time   Jarvis Krumbein
• [ATM] ATM Dremel diamonds   The Alarm Co.
  • [ATM] ATM Dremel diamonds   Mark Holm
    • [ATM] ATM Dremel diamonds   Richard
      • [ATM] Dremel Tools and water   Michael Wheatley
      • [ATM] Dremel Tools and water   Don Clement
• [ATM] Rush into F3.5   Ukyo Chen
  • [ATM] [atm_free] Rush into F3.5   Mel Bartels
  • [ATM] Rush into F3.5   vladimir sacek
• [ATM] [atm_free] Rush into F3.5   Ukyo Chen
  • [ATM] [atm_free] Rush into F3.5   Dream - Telescopes & Accessories, Inc.
• [ATM] DC Motor for grinding machine question   GARY FUCHS
  • [ATM] DC Motor for grinding machine question   Don Clement
• [ATM] [atm_free] Rush into F3.5   Ukyo Chen
• [ATM] [atm_free] Rush into F3.5   Ukyo Chen
• [ATM] Rush into F3.5   Ukyo Chen
• [ATM] F2.5 hyperbolic mirror for photograph.   Ukyo Chen
• [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.   Bob Drew
• [ATM] Voice coil actuators was: DC Motor for grinding machine question   GARY FUCHS
  • [ATM] Voice coil actuators was: DC Motor for grinding machine question   Don Clement
    • [ATM] Voice coil actuators was: DC Motor for grinding machine question   Lawrence D. Lopez
      • [ATM] Voice coil actuators was: DC Motor for grinding machine question   Lawrence D. Lopez
    • [ATM] Voice coil actuators was: DC Motor for grinding machine question   Dale Eason
      • [ATM] Voice coil actuators was: DC Motor for grinding machine question   Mark Holm
      • [ATM] Voice coil actuators was: DC Motor for grinding machine question   Mike Lockwood
      • [ATM] Voice coil actuators was: DC Motor for grinding machine question   Don Clement
      • [ATM] Voice coil actuators was: DC Motor for grinding machine question   Richard
      • [ATM] Voice coil actuators was: DC Motor for grinding machine question   Dale Eason
      • [ATM] Voice coil actuators was: DC Motor for grinding machinequestion   Don Clement
      • [ATM] Voice coil actuators was: DC Motor for grindingmachinequestion   James Lerch
      • [ATM] Voice coil actuators   Dominic-Luc Webb
      • [ATM] Voice coil actuators   Don Clement
      • [ATM] Voice coil actuators   Don Clement
      • [ATM] Voice coil actuators   Dominic-Luc Webb
      • [ATM] Voice coil actuators   Frank Billig
      • [ATM] Voice coil actuators   Dominic-Luc Webb
• [ATM] Best locations for 4-Pt. Wiffletree edge support PLS   polaraligned
  • [ATM] Best locations for 4-Pt. Wiffletree edge support PLS   John Sherman
• [ATM] Preparing to trepan for the first time - Success!   Chris Dalla Piazza
• [ATM] Shutting Down the Night Sky   Michael Wheatley
  • [ATM] Shutting Down the Night Sky   Daniel Fundo
    • [ATM] Shutting Down the Night Sky   Richard
      • [ATM] Shutting Down the Night Sky   Jeff Rowe
      • [ATM] Shutting Down the Night Sky   Chris Rowland
      • [ATM] Shutting Down the Night Sky   Jeff Rowe
      • [ATM] Shutting Down the Night Sky   George Anderson
• [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.   Bob Drew
  • [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.   Mitch
• [ATM] mirror box baffle question   Dave Smith
  • [ATM] mirror box baffle question   Michael Lindner
    • [ATM] mirror box baffle question   Alexis Cousein
  • [ATM] mirror box baffle question   Dream - Telescopes & Accessories, Inc.
    • [ATM] mirror box baffle question   Mel Bartels
    • [ATM] mirror box baffle question   Nils Olof Carlin
  • [ATM] mirror box baffle question   John Sherman
  • [ATM] mirror box baffle question   Mark Holm
    • [ATM] mirror box baffle question   Mark Holm
• [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.   Bob Drew
  • [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.   Mel Bartels
  • [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.   Dale Eason
  • [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.   Michael Wheatley
  • [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.   Jim Burrows
  • [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.   Nils Olof Carlin
    • [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.   Jan van Gastel
• [ATM] FW: Best locations for 4-Pt. Wiffletree edge support PLS.   Mitch
• [ATM] Polarizing filters versus neutral density filters   John Lynch
  • [ATM] Polarizing filters versus neutral density filters   James Crombie
    • [ATM] Polarizing filters versus neutral density filters   Nils Olof Carlin
  • [ATM] Polarizing filters versus neutral density filters   Mark Holm
  • [ATM] Polarizing filters versus neutral density filters   Mark Holm
• [ATM] invitation   Jan Grecner
• [ATM] 22-inch binocular enclosure   Bruce Sayre
• [ATM] Pitch Substitute for very fast mirrors   Kevin MIchael Zabbo
  • [ATM] Pitch Substitute for very fast mirrors   hermit
    • [ATM] Pitch Substitute for very fast mirrors   Kevin MIchael Zabbo
      • [ATM] Pitch Substitute for very fast mirrors   hermit
      • [ATM] Pitch Substitute for very fast mirrors   Mark Holm
      • [ATM] Pitch Substitute for very fast mirrors   Michael Wheatley
      • [ATM] Pitch Substitute for very fast mirrors   Pete
      • [ATM] Pitch Substitute for very fast mirrors   Tom Fredrickson
  • [ATM] Pitch Substitute for very fast mirrors   Mike Lockwood
    • [ATM] Pitch Substitute for very fast mirrors   Kevin MIchael Zabbo
  • [ATM] Pitch Substitute for very fast mirrors   Ken Hunter
    • [ATM] Pitch Substitute for very fast mirrors   Mel Bartels
      • [ATM] Pitch Substitute for very fast mirrors   Mitch
      • [ATM] Pitch Substitute for very fast mirrors   Mel Bartels
      • [ATM] Oversize tools questions - was Pitch Substitute for very fast mirrors   GF
      • [ATM] Oversize tools questions - was Pitch Substitute for very fast mirrors   Mel Bartels
      • [ATM] Oversize tools questions - was Pitch Substitute for veryfast mirrors   Mitch
      • [ATM] Oversize tools questions - was Pitch Substitute forveryfast mirrors   Mel Bartels
      • [ATM] Oversize tools questions - was Pitch Substituteforveryfast mirrors   Mitch
      • [ATM] Oversize tools questions - was PitchSubstituteforveryfast mirrors   Mel Bartels
      • [ATM] Oversize tools questions - was PitchSubstituteforveryfastmirrors   Mitch
      • [ATM] Oversize tools questions - wasPitchSubstituteforveryfastmirrors   Mel Bartels
      • [ATM] Oversize tools questions -wasPitchSubstituteforveryfastmirrors   Mitch
      • [ATM] Pressing was Re: Oversize tools questions   Dale Eason
      • [ATM] Pressing was Re: Oversize tools questions   Mel Bartels
      • [ATM] Pressing was Re: Oversize tools questions   Jan Bentz
      • [ATM] Pressing was Re: Oversize tools questions   Mel Bartels
    • [ATM] Pitch Substitute for very fast mirrors   Kevin MIchael Zabbo
      • [ATM] Pitch Substitute for very fast mirrors   hermit
      • [ATM] Pitch Substitute for very fast mirrors   Mel Bartels
      • [ATM] Pitch Substitute for very fast mirrors   hermit
      • [ATM] Pitch Substitute for very fast mirrors   Kevin MIchael Zabbo
      • [ATM] Pitch Substitute for very fast mirrors   hermit
• [ATM] Voice coil actuators was: DC Motor for grinding machine question   GARY FUCHS
  • [ATM] Voice coil actuators was: DC Motor for grinding machine question   Dominic-Luc Webb
    • [ATM] Voice coil actuators was: DC Motor for grinding machine question   Don Clement
• [ATM] Last word in minimalism   Bruce Sayre
• [ATM] Cementing the core back in place   Christopher Dalla Piazza
• [ATM] Voice coil actuators was: DC Motor for grinding machine question   GARY FUCHS
  • [ATM] Voice coil actuators was: DC Motor for grinding machine question   Don Clement
    • [ATM] Voice coil actuators was: DC Motor for grindingmachine question   Vladimir Galogaza
• [ATM] Voice coil actuators was: DC Motor for grinding machine question   GARY FUCHS
• [ATM] What happened to Bob May?   Michael Koch
• [ATM] Voice coil actuators was: DC Motor for grinding machine question   GARY FUCHS
• [ATM] Last word in minimalism   Tom Krajci
• [ATM] A bit of hand polishing advice please................   John and Bernadine Murray
  • [ATM] A bit of hand polishing advice please................   Mark Holm
    • [ATM] A bit of hand polishing advice please................   John and Bernadine Murray
    • [ATM] A bit of hand polishing advice please................   Jerry
  • [ATM] A bit of hand polishing advice please................   Jerry
    • [ATM] A bit of hand polishing advice please................   John and Bernadine Murray
      • [ATM] A bit of hand polishing advice please................   Jerry
      • [ATM] A bit of hand polishing advice please................   Mark Holm
      • [ATM] A bit of hand polishing advice please................   Mitch
• [ATM] Last word in minimalism   Peter
  • [ATM] Determining ideal truss tube dimentions   Dan Doyle
    • [ATM] Determining ideal truss tube dimentions   Jim McPherson
• [ATM] A bit of hand polishing advice please................   John and Bernadine Murray
• [ATM] Pitch Substitute for very fast mirrors   Greg Jones
• [ATM] Successive Approximation   Richard F.L.R. Snashall
• [ATM] Metal Laser treatment.   Marco
  • [ATM] Metal Laser treatment.   Don Clement
• [ATM] An update on Manuels mirror...........   John and Bernadine Murray
• [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.   Bob Drew
  • [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.   Mel Bartels
  • [ATM] Best locations for 4-Pt. Wiffletree edge support PLS.   Jan van Gastel
• [ATM] An update on our mirror.........   John and Bernadine Murray
  • [ATM] An update on our mirror.........   Dale Eason
    • [ATM] An update on our mirror.........   John and Bernadine Murray
• [ATM] Updated pictures of 8"f6 mirror............   John and Bernadine Murray
  • [ATM] Updated pictures of 8"f6 mirror............   Jerry
    • [ATM] Updated pictures of 8"f6 mirror............   Richard
      • [ATM] Updated pictures of 8"f6 mirror............   Jerry
      • [ATM] Updated pictures of 8"f6 mirror............   Vladimir Galogaza
      • [ATM] Updated pictures of 8"f6 mirror............   Jerry
      • [ATM] Updated pictures of 8"f6 mirror............   John Sherman
    • [ATM] Updated pictures of 8"f6 mirror............   John and Bernadine Murray
      • [ATM] Updated pictures of 8"f6 mirror............   Mitch
      • [ATM] Updated pictures of 8"f6 mirror............   Jerry
      • [ATM] Updated pictures of 8"f6 mirror............   Mike Lockwood
      • [ATM] Updated pictures of 8"f6 mirror............   Jerry
      • [ATM] Updated pictures of 8"f6 mirror............   John and Bernadine Murray
      • [ATM] Updated pictures of 8"f6 mirror............   Mike Lockwood
      • [ATM] Updated pictures of 8"f6 mirror............   Jerry
      • [ATM] Updated pictures of 8"f6 mirror............   hermit
      • [ATM] Updated pictures of 8"f6 mirror............   Jerry
      • [ATM] Updated pictures of 8"f6 mirror............   John and Bernadine Murray
      • [ATM] Updated pictures of 8"f6 mirror............   John and Bernadine Murray
• [ATM] Fwd: Pressing was Re: Oversize tools questions   Matthew Fuchs
  • [ATM] Fwd: Pressing was Re: Oversize tools questions   Mel Bartels
    • [ATM] Fwd: Pressing was Re: Oversize tools questions   B. Bainbridge
      • [ATM] Fwd: Pressing was Re: Oversize tools questions   Mel Bartels
• [ATM] 20incher with segmented and ribbed mirror at 12Kg   Andreas Derwahl
  • [ATM] 20incher with segmented and ribbed mirror at 12Kg   Ric Rokosz
    • [ATM] 20incher with segmented and ribbed mirror at 12Kg   Andreas Derwahl
      • [ATM] 20incher with segmented and ribbed mirror at 12Kg   John Sherman
      • [ATM] 20incher with segmented and ribbed mirror at 12Kg   Mel Bartels
      • [ATM] 20incher with segmented and ribbed mirror at 12Kg   Andreas Derwahl
    • [ATM] 20incher with segmented and ribbed mirror at 12Kg   Ric Rokosz
• [ATM] Fast Astrograph Considerations   Don Clement
• [ATM] Off topic: humidifier and salt buildup   Tom Krajci
• [ATM] Bob May   Vladimir Galogaza
  • [ATM] Bob May   Thomas Janstrom
• [ATM] Cassegrain information page   Mike Lockwood
• [ATM] Bob May   Michael Koch
• [ATM] The last public Star Party at Chiefland , Florida   Russell Jocoy
  • [ATM] The last public Star Party at Chiefland , Florida   Michael Lindner
    • [ATM] The last public Star Party at Chiefland , Florida   James Lerch
      • [ATM] is mirror thermal equilibrium important   Vladimir Galogaza
      • [ATM] is mirror thermal equilibrium important   Jack Swaton at Starry Host
      • [ATM] is mirror thermal equilibrium important   Mark Holm
  • [ATM] The last public Star Party at Chiefland , Florida   Dominic-Luc Webb
• [ATM] Spectra Systems SureSharp   Jarvis Krumbein
  • [ATM] Spectra Systems SureSharp   George Anderson
  • [ATM] Lateral mirror support test cases measured with interferometer.   Dale Eason
    • [ATM] Lateral mirror support test cases measured withinterferometer.   John Sherman
• [ATM] An Ancient Computer Surprises Scientists   Vladimir Galogaza
• [ATM] An Ancient Computer Surprises Scientists   Dominic-Luc Webb

Last message date: Thu Nov 30 19:54:33 JST 2006
Archived on: Thu Nov 30 19:54:47 JST 2006

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...