[ATM] grinding with tool

[hermit]

horace r davis wrote:
> you can disregard the e mail I sent earlier the center is coming down I
> am with in .004 after 1 1/2 title tool #120 grit It looks like I have a
> small flat edge 1/8 to 1/4 inch in from mirror edge the tile tool is not
> touching it at this time what do you recommend. Horace
> _______________________________________________
>   

If you are in the hogging stage, you can gradually work from the 
'hogging stroke' to a normal stroke.  That will take you to the edge as 
you reach the center.   Just have to kind of  use your judgment on 
that.  If you aren't hogging.  Never mind. ;)

Ken Lowther