[ATM] TILE TOOL

[Jarvis Krumbein]

Horace, first make sure that the tiles are hard clear through.  If the
tiles are glazed, there is the possibility that they are fairly soft
under the glaze.  If they are floor tiles, they are probably hard but it
doesn't hurt to check.  If the tiles are OK, don't bother to remove the
glaze.  It will be removed during the grinding process while the tiles
are ground to conform to the mirror surface.

Jarvis Krumbein
 
On Fri, 26 Jan 2007 18:05:23 -0500 horace r davis <hrd9 at juno.com> writes:
> 
> I have picked up 2" hex tiles in 10" mats to make my tool to finish
> grinding my mirror. Soul I remove the gazing from the tile first.
> Horace
> _______________________________________________
> ATM mailing list http://www.atmlist.net/
> 
>