July 2007 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Jul 1 01:06:20 JST 2007
Ending: Mon Jul 30 23:52:24 JST 2007
Messages: 292

• [ATM] Polishing question   Anthony Anconetani
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Anthony Anconetani
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Anthony Anconetani
• [ATM] Polishing question   Anthony Anconetani
• [ATM] polish time for 13 inch   Anthony Anconetani
• [ATM] TOT vs MOT   Anthony Anconetani
• [ATM] Mirror aluminizing suggestions?   George Anderson
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   George Anderson
• [ATM] [Fwd: Re: Betr.: Re: cutting a big piece of plate glass - Polarizer]   George Anderson
• [ATM] B&W QuickCam guider.exe   George Anderson
• [ATM] B&W QuickCam guider.exe   George Anderson
• [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany   Corona Australis
• [ATM] Hercules v2.0   Daniel Bakken
• [ATM] Rechanneling, Malacara   Mel Bartels
• [ATM] polish time for 13 inch   Mel Bartels
• [ATM] polish time for 13 inch   Mel Bartels
• [ATM] polish time for 13 inch   Mel Bartels
• [ATM] polish time for 13 inch   Mel Bartels
• [ATM] polish time for 13 inch   Mel Bartels
• [ATM] polish time for 13 inch   Mel Bartels
• [ATM] polish time for 13 inch   Mel Bartels
• [ATM] polish time for 13 inch   Mel Bartels
• [ATM] polish time for 13 inch   Mel Bartels
• [ATM] polish time for 13 inch   Mel Bartels
• [ATM] polish time for 13 inch   Mel Bartels
• [ATM] polish time for 13 inch   Mel Bartels
• [ATM] polish time for 13 inch   Mel Bartels
• [ATM] cutting a big piece of plate glass into mirror or tool blanks   Guy Brandenburg
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Guy Brandenburg
• [ATM] cutting a big piece of plate glass into mirror or tool   Guy Brandenburg
• [ATM] Cutting Plate Glass & looking for strain..   Guy Brandenburg
• [ATM] cutting a big piece of plate glass into mirror or tool   Guy Brandenburg
• [ATM] polish time for 13 inch   Guy Brandenburg
• [ATM] polish time for 13 inch   Guy Brandenburg
• [ATM] re spam   Chuck Broward
• [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany   Chuck Broward
• [ATM] Refiguring cass mirror to newt   Jim Burrows
• [ATM] Focuser Collimation   Nils Olof Carlin
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Tom Conlin
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Tom Conlin
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Curt Diggs
• [ATM] Coolling fans for mirror   Curt Diggs
• [ATM] TOT vs MOT   Dale Eason
• [ATM] Coolling fans for mirror   Dale Eason
• [ATM] Mirror-grinding 10"   Klaus Eriksen
• [ATM] Mirror-grinding 10"   Klaus Eriksen
• [ATM] SPAM AGAIN!   Matthew Fuchs
• [ATM] Optical flat part II   Vladimir Galogaza
• [ATM] Optical flat part II   Vladimir Galogaza
• [ATM] Optical flat part II   Vladimir Galogaza
• [ATM] Nearly polished...but...   Vladimir Galogaza
• [ATM] [Fwd: Re: VIVA towels protect optical surfaces?]   Vladimir Galogaza
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Vladimir Galogaza
• [ATM] blank internal stress checking with polarizers.   Vladimir Galogaza
• [ATM] blank internal stress checking with polarizers.   Vladimir Galogaza
• [ATM] TOT vs MOT   Vladimir Galogaza
• [ATM] TOT vs MOT   Vladimir Galogaza
• [ATM] Mirror aluminizing suggestions?   James Gort
• [ATM] cutting a big piece of plate glass into mirror or tool   Dan Harriman
• [ATM] SPAM AGAIN!   Mark Holm
• [ATM] questions about the condition of this mirror   Mark Holm
• [ATM] [Fwd: Re: VIVA towels protect optical surfaces?]   Mark Holm
• [ATM] plate glass blanks   Mark Holm
• [ATM] Mirror Scratches- and no tile tool available   Mark Holm
• [ATM] carbon fiber composite fabrication   Mark Holm
• [ATM] TOT vs MOT   Mark Holm
• [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany   Robert Houdart
• [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany   Robert Houdart
• [ATM] Hercules v2.0   Robert Houdart
• [ATM] mirror on the moon   Douglas Hudgins
• [ATM] VIVA towels protect optical surfaces?   Douglas Hudgins
• [ATM] SPAM AGAIN!   Ken Hunter
• [ATM] Sharpie test: a little help?   Ken Hunter
• [ATM] ATM Digest, Vol 43, Issue 30   Jack.Swaton at starryhost.com
• [ATM] Mirror-grinding 10"   Thomas Janstrom
• [ATM] Refiguring cass mirror to newt   Thomas Janstrom
• [ATM] Nearly polished...but...   Jerry
• [ATM] Polishing question   Jerry
• [ATM] Mirror Scratches- and no tile tool available   Jerry
• [ATM] Can the spam   Russell Jocoy
• [ATM] Cutting Plate Glass & looking for strain..   Russell Jocoy
• [ATM] Plastic.....   Russell Jocoy
• [ATM] re spam   Joe
• [ATM] SPAM AGAIN!   Eric S. Johansson
• [ATM] re spam   Eric S. Johansson
• [ATM] and now something complete different Re: Can the spam   Eric S. Johansson
• [ATM] Need Advice on Mounting & Driving a 16 Inch Newtonian   Eric S. Johansson
• [ATM] Need Advice on Mounting & Driving a 16 Inch Newtonian   Eric S. Johansson
• [ATM] suppler plate glass   KR
• [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany   Stathis Kafalis
• [ATM] Mirror Scratches- and no tile tool available   Stathis Kafalis
• [ATM] suppler plate glass   Stathis Kafalis
• [ATM] cutting a big piece of plate glass into mirror or tool   Sachindra Karanth
• [ATM] Focuser Collimation   Stephen Koehler
• [ATM] Mirror Scratches- and no tile tool available   Adam Krause
• [ATM] Need Advice on Mounting & Driving a 16 Inch Newtonian   Adam Krause
• [ATM] Mirror Scratches- and no tile tool available   Adam Krause
• [ATM] Mirror Scratches- and no tile tool available   Adam Krause
• [ATM] Mirror Scratches- and no tile tool available   Adam Krause
• [ATM] Optical flat part II   Jarvis Krumbein
• [ATM] blank internal stress checking with polarizers.   Jarvis Krumbein
• [ATM] polish time for 13 inch   Jarvis Krumbein
• [ATM] It amazes me...   Shane LaPierre
• [ATM] cutting a big piece of plate glass into mirror or tool   James Lerch
• [ATM] cutting a big piece of plate glass into mirror or tool   James Lerch
• [ATM] SPAM AGAIN!   Michael Lindner
• [ATM] re spam   Michael Lindner
• [ATM] Rechanneling, Malacara   Mike Lockwood
• [ATM] Rechanneling, Malacara   Mike Lockwood
• [ATM] VIVA towels protect optical surfaces?   Mike Lockwood
• [ATM] Polishing question   Mike Lockwood
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Mike Lockwood
• [ATM] polish time for 13 inch   Mike Lockwood
• [ATM] 20" FS update and what size grinding tool   Mike Lockwood
• [ATM] Plastic.....   Lawrence D. Lopez
• [ATM] SPAM AGAIN!   Bruce MacDonald
• [ATM] carbon fiber composite fabrication   Marco
• [ATM] Focuser Collimation   William Marriott
• [ATM] Focuser Collimation   William Marriott
• [ATM] Musing upon 20" fused silica blank   William Marriott
• [ATM] carbon fiber composite fabrication   William Marriott
• [ATM] carbon fiber composite fabrication   William Marriott
• [ATM] carbon fiber composite fabrication   William Marriott
• [ATM] 20" FS update and what size grinding tool   William Marriott
• [ATM] SPAM AGAIN!   Bob May
• [ATM] SPAM AGAIN!   Bob May
• [ATM] mirror on the moon   Bob May
• [ATM] SPAM AGAIN!   Bob May
• [ATM] SPAM AGAIN!   Bob May
• [ATM] Optical flat part II   Bob May
• [ATM] Nearly polished...but...   Bob May
• [ATM] questions about the condition of this mirror   Bob May
• [ATM] Rechanneling, Malacara   Bob May
• [ATM] VIVA towels protect optical surfaces?   Bob May
• [ATM] All BK7   Bob May
• [ATM] plate glass blanks   Bob May
• [ATM] Mirror Scratches- and no tile tool available   Bob May
• [ATM] Mirror Scratches- and no tile tool available   Bob May
• [ATM] cutting a big piece of plate glass into mirror or toolblanks   Bob May
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Bob May
• [ATM] cutting a big piece of plate glass into mirror or tool   Bob May
• [ATM] cutting a big piece of plate glass into mirror or tool   Bob May
• [ATM] Cutting Plate Glass & looking for strain..   Bob May
• [ATM] Sharpie test: a little help?   Bob May
• [ATM] cutting glass   Bob May
• [ATM] blank internal stress checking with polarizers.   Bob May
• [ATM] Polishing question   Bob May
• [ATM] rumaging small bearings   Bob May
• [ATM] polish time for 13 inch   Bob May
• [ATM] suppler plate glass   Bob May
• [ATM] B&W QuickCam guider.exe   Bob May
• [ATM] Ear of the Sow   Scott Milligan
• [ATM] re spam   Charles Mitchard
• [ATM] cutting a big piece of plate glass into mirror or tool   Charles Mitchard
• [ATM] plate glass blanks   Thomas A. Moulton
• [ATM] Optical flats   Francis J. O'Reilly
• [ATM] Optical flat part II   Francis J. O'Reilly
• [ATM] Optical flat part II   Francis J. O'Reilly
• [ATM] Optical flat part II   Francis J. O'Reilly
• [ATM] Nearly polished...but...   Francis J. O'Reilly
• [ATM] questions about the condition of this mirror   Francis J. O'Reilly
• [ATM] questions about the condition of this mirror   Francis J. O'Reilly
• [ATM] My spheres of infinite radius   Francis J. O'Reilly
• [ATM] Focuser Collimation   Peter
• [ATM] SPAM AGAIN!   Norm Prince
• [ATM] Nearly polished...but...   Norm Prince
• [ATM] Nearly polished...but...   Norm Prince
• [ATM] polish time for 13 inch   Norm Prince
• [ATM] polish time for 13 inch   Norm Prince
• [ATM] polish time for 13 inch   Norm Prince
• [ATM] polish time for 13 inch   Norm Prince
• [ATM] 12 inches of fun!!!   Norm Prince
• [ATM] SPAM AGAIN!   Mitchell R
• [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany   Mitchell R
• [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany   Mitchell R
• [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany   Mitchell R
• [ATM] Mirror Scratches- and no tile tool available   Mitchell R
• [ATM] polish time for 13 inch   Mitchell R
• [ATM] polish time for 13 inch   Mitchell R
• [ATM] polish time for 13 inch   Mitchell R
• [ATM] suppler plate glass   Mitchell R
• [ATM] SPAM AGAIN!   Richard
• [ATM] SPAM AGAIN!   Richard
• [ATM] Optical flat part II   Richard
• [ATM] Need Advice on Mounting & Driving a 16 Inch Newtonian   Richard
• [ATM] Ear of the Sow   Richard
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Richard
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Richard
• [ATM] Ear of the Sow   Richard
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Richard
• [ATM] carbon fiber composite fabrication   Richard
• [ATM] Alternate Materials   Richard
• [ATM] Coolling fans for mirror   Richard
• [ATM] 20" FS update and what size grinding tool   Ric Rokosz
• [ATM] VIVA towels protect optical surfaces?   Jeff Rowe
• [ATM] VIVA towels protect optical surfaces?   Jeff Rowe
• [ATM] [Fwd: Re: Betr.: Re: cutting a big piece of plate glass - Polarizer]   Jeff Rowe
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Jeff Rowe
• [ATM] SPAM AGAIN!   Chris Rowland
• [ATM] SPAM AGAIN!   Chris Rowland
• [ATM] SPAM AGAIN!   Chris Rowland
• [ATM] SPAM AGAIN!   Chris Rowland
• [ATM] SPAM AGAIN!   Chris Rowland
• [ATM] re spam   Chris Rowland
• [ATM] VIVA towels protect optical surfaces?   Ross Sackett
• [ATM] Sharpie test: a little help?   Ross Sackett
• [ATM] Sharpie test: a little help?   Ross Sackett
• [ATM] VIVA towels protect optical surfaces?   Andy Saulietis
• [ATM] Rechanneling, Malacara   Andy Saulietis
• [ATM] blank internal stress checking with polarizers.   Attila Schné
• [ATM] TOT vs MOT   Richard Schwartz
• [ATM] Coolling fans for mirror   John Sherman
• [ATM] Need Advice on Mounting & Driving a 16 Inch Newtonian   David Sleeter
• [ATM] cutting a big piece of plate glass into mirror or tool blanks   Dave Smith
• [ATM] Un-SPAM   Richard F.L.R. Snashall
• [ATM] Un-SPAM   Richard F.L.R. Snashall
• [ATM] All BK7   Richard F.L.R. Snashall
• [ATM] BSC1/F2   Richard F.L.R. Snashall
• [ATM] Ear of the Sow   Richard F.L.R. Snashall
• [ATM] Ear of the Sow   Richard F.L.R. Snashall
• [ATM] Ear of the Sow   Richard F.L.R. Snashall
• [ATM] Ear of the Sow   Richard F.L.R. Snashall
• [ATM] blank internal stress checking with polarizers.   Richard F.L.R. Snashall
• [ATM] Alternate Materials   Richard F.L.R. Snashall
• [ATM] Plastic.....   Richard F.L.R. Snashall
• [ATM] polish time for 13 inch   David Steinhauer
• [ATM] polish time for 13 inch   David Steinhauer
• [ATM] Optical flat part II   James Sturtevant
• [ATM] Rechanneling, Malacara   James Sturtevant
• [ATM] Rechanneling, Malacara   James Sturtevant
• [ATM] Rechanneling, Malacara   James Sturtevant
• [ATM] SPAM AGAIN!   Roman Toledo
• [ATM] questions about the condition of this mirror   Roman Toledo
• [ATM] questions about the condition of this mirror   Roman Toledo
• [ATM] cutting a big piece of plate glass into mirror or tool   Roman Toledo
• [ATM] carbon fiber composite fabrication   Roman Toledo
• [ATM] SPAM AGAIN!   David B. Toth
• [ATM] SPAM AGAIN!   David B. Toth
• [ATM] SPAM AGAIN!   David B. Toth
• [ATM] re spam   David B. Toth
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Harro Treur
• [ATM] Betr.: Hercules v2.0   Harro Treur
• [ATM] Refiguring cass mirror to newt   Gord Tulloch
• [ATM] Refiguring cass mirror to newt   Gord Tulloch
• [ATM] Optical flat part II   Dominic-Luc Webb
• [ATM] Portrait of a giant 42 inch Dobsonian telescope in Germany   Dominic-Luc Webb
• [ATM] plate glass blanks   Dominic-Luc Webb
• [ATM] plate glass blanks   Dominic-Luc Webb
• [ATM] cutting a big piece of plate glass into mirror or tool blanks   Dominic-Luc Webb
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Dominic-Luc Webb
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Dominic-Luc Webb
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Dominic-Luc Webb
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Dominic-Luc Webb
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Dominic-Luc Webb
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   Dominic-Luc Webb
• [ATM] carbon fiber composite fabrication   Dominic-Luc Webb
• [ATM] rumaging small bearings   Dominic-Luc Webb
• [ATM] polish time for 13 inch   Dominic-Luc Webb
• [ATM] suppler plate glass   Dominic-Luc Webb
• [ATM] polish time for 13 inch   Dominic-Luc Webb
• [ATM] Alternate Materials   Dominic-Luc Webb
• [ATM] Plastic.....   Dominic-Luc Webb
• [ATM] polish time for 13 inch   Kevin MIchael Zabbo
• [ATM] cutting glass   joe campbell
• [ATM] Mirror aluminizing suggestions?   lance clarke
• [ATM] mirror problem   horace r davis
• [ATM] plate glass blanks   horace r davis
• [ATM] plate glass blanks   horace r davis
• [ATM] primary mirror cell   horace r davis
• [ATM] suppler plate glass   horace r davis
• [ATM] Plastic.....   fundo at bellsouth.net
• [ATM] Plastic.....   fundo at bellsouth.net
• [ATM] SPAM AGAIN!   hermit
• [ATM] SPAM AGAIN!   hermit
• [ATM] Musing upon 20" fused silica blank   hermit
• [ATM] [Fwd: Re: Betr.: Re: cutting a big piece of plate glass - Polarizer]   hermit
• [ATM] Mirror Scratches- and no tile tool available   hermit
• [ATM] Sharpie test: a little help?   hermit
• [ATM] polish time for 13 inch   hermit
• [ATM] polish time for 13 inch   hermit
• [ATM] questions about the condition of this mirror   jcmulherin
• [ATM] FW: questions about the condition of this mirror   jcmulherin
• [ATM] SPAM AGAIN!   waldo kitty
• [ATM] blank internal stress checking with polarizers.   waldo kitty
• [ATM] cutting a big piece of plate glass into mirror or tool blanks   waldo kitty
• [ATM] Betr.: Re: cutting a big piece of plate glass - Polarizer   waldo kitty
• [ATM] Polishing question   waldo kitty
• [ATM] Spamm   marty
• [ATM] Spamm   marty
• [ATM] Coolling fans for mirror   rugo at iinet.net.au
• [ATM] Coolling fans for mirror   rugo at iinet.net.au
• [ATM] rumaging small bearings   tillerman1 at videotron.ca

Last message date: Mon Jul 30 23:52:24 JST 2007
Archived on: Mon Jul 30 23:52:22 JST 2007

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...